---
id: alerts
type: screen
title: Alerts
summary: Therbie can send a notification when the device turns Hot, when memory use passes a level, when the battery charges to a level, or when it runs low. Alerts only work while Therbie is running, for example on screen or with the floating monitor open.
section: device
url: "https://irrhuh.app/therbie/guide/alerts.html"
related: [background-limits, floating-monitor, thermal-states, battery, troubleshooting]
platform: [iphone, ipad]
applies_to: 1.0
updated: 2026-11-16
opens_from: [dashboard]
---

# Alerts

Therbie on iPhone and iPad can send you a notification in four cases: the device turns Hot, memory use passes a level you choose, the battery charges to a level, or the battery runs low. **Alerts only work while Therbie is running**:

- while Therbie is on screen;
- while the [floating monitor](https://irrhuh.app/therbie/guide/floating-monitor.html) is open;
- while a sensor keeps Therbie running in the background, for example during a trip.

When iOS has paused Therbie, nothing is checked.

## Turn alerts on

1. Tap **⋯ › Alerts**.
2. Switch on the alerts you want. iOS asks for notification permission the first time you turn one on. Therbie doesn't ask at launch.
3. Tap **Send Test Alert** to see what an alert looks like.

All four alerts are off until you turn them on.

| Alert | Fires when | Setting |
|---|---|---|
| **Hot** | The thermal state reaches Hot or Critical | None |
| **High memory** | Memory in use (App, Wired and Compressed) reaches the level | 70% to 95% in steps of 5. Default 90% |
| **Charged to** | The battery reaches the level while charging | 50% to 100% in steps of 5. Default 80% |
| **Battery low** | The battery drops to the level while on battery power | 5% to 50% in steps of 5. Default 20% |

If notifications are turned off for Therbie in iOS Settings, the Alerts sheet says so and shows **Turn On in Settings**.

## When an alert fires

- **Only on a change.** An alert fires when a reading *reaches* its level while Therbie is watching, not because it was already past the level when Therbie started. For example, if the battery is already at 85% when you open Therbie, **Charged to** 80% won't fire until the level drops below 80% and rises again.
- **Not over and over.** The same alert doesn't repeat within 10 minutes, even if you close and reopen Therbie.
- **Re-arming:**
  - **Hot** can fire again only after the device has been Warm or cooler for 2 minutes.
  - **High memory** re-arms once use drops 5 points below the level.
  - On devices that report single percents, a battery alert re-arms once the level moves 2 points back past it. On devices that report 5% steps, it re-arms one step back.
- **Not after a gap.** If Therbie hasn't taken a reading for more than 2 minutes, for example because it was closed, the alerts start over. Opening the app never brings up an old alert.
- **"About" on 5%-step devices.** Where iOS gives the battery level in 5% steps, the alert says "Battery at about 80%".
- **One of each kind.** A new alert of the same kind replaces the old one in Notification Centre.

## Why alerts need Therbie running

iOS pauses apps a few seconds after you leave them, and a paused app can't read the battery or the thermal state. So a charge alert only works while Therbie is running. [Why background alarms are rare](https://irrhuh.app/therbie/kb/background-limits.html) explains more.

> **Tip** Charging to 80%? Start the floating monitor, tuck it at the edge of the screen, and carry on. Therbie tells you when the battery gets there. For a charge alert that works with Therbie closed, use a Shortcuts automation instead: **Automation › New › Battery Level › Rises Above 80%**. The **Shortcuts & Siri** sheet in Therbie shows how.
