---
id: battery
type: concept
title: Battery readings
summary: Many iPhones and iPads give apps the battery level only in 5% steps, so Therbie marks those readings with ≈ and they can differ from the status bar. Charging watts are an estimate. Apps can't read or change the charge limit or Low Power Mode.
section: kb
url: "https://irrhuh.app/therbie/kb/battery.html"
related: [dashboard, alerts, benchmarks, glossary]
platform: [iphone, ipad, mac]
applies_to: 1.0
updated: 2026-11-16
---

# Battery readings

On many iPhones and iPads, iOS gives apps the battery level only in 5% steps. Therbie marks those readings with **≈**, and they can differ from the status bar's percentage by a few points. On a Mac, the battery level is exact.

## How Therbie knows

Therbie treats a device's battery readings as approximate until it has seen three different levels that aren't on a 5% step, for example 73%, 81% and 92%. After that, it shows single percents without the **≈**.

## Why the level can look stuck

iOS can keep handing apps an old battery level while charging. Therbie asks iOS for a fresh reading every 20 seconds. Even so, with 5% steps, a level that doesn't move for ten minutes while charging is normal.

## Charging speed and watts

iOS doesn't tell apps the real charging power. Therbie measures how fast the level rises and combines it with a typical battery size for the device model. The watts shown are a rough guide, marked with **≈**.

Below 80%, a reading under about 7.5 W makes Therbie show **Charging slowly**. That usually means a low-power charger (a monitor's USB-C port, for example), a worn cable, or a hot or busy device. For a proper measurement, use the **Charger Test** on the Benchmark screen; see [Benchmarks and throttle tests](https://irrhuh.app/therbie/guide/benchmarks.html).

## Charge limits and "holding"

- **iPhone 15 and later:** **Settings › Battery › Charging** sets a limit from 80% to 100%.
- **Other iPhones:** Optimised Battery Charging learns your routine and may hold at 80% until you need it.
- **iPad:** options vary by model.

On devices that report single percents, Therbie shows **Charging is holding at …%** when the level hasn't moved for 10 minutes while plugged in, at about 80% or above.

## What apps can't do

Apps can't:

- read or change the charge limit;
- turn Low Power Mode on or off;
- open the Battery page in Settings.

So Therbie tells you where to find each.

## Low Power Mode

The quickest way to turn it on is the Control Center control: open Control Center, tap **+**, then **Add a Control**, and choose **Low Power Mode**. A Shortcuts automation with the **Set Low Power Mode** action can also turn it on at a battery level you choose.

In Low Power Mode:

- **Benchmarks run slower,** and Therbie warns you.
- **Therbie reads less often,** at least every 10 seconds, to save energy.
- **The Mac won't start tests** on a device that has it on. See [Testing devices from your Mac](https://irrhuh.app/therbie/guide/device-link.html).
