---
id: sensors-sound
type: screen
title: Sound level
summary: Therbie's Sound Level sensor is a decibel meter that uses the microphone. It shows the level with a peak hold, the last minute, a spectrum and a spectrogram. It never records audio; it keeps only levels, and, if you turn on Identify sounds, the names of sound types.
section: device
url: "https://irrhuh.app/therbie/guide/sensors-sound.html"
related: [sensors-vibration, history-insights, shortcuts-siri, privacy]
platform: [iphone, ipad]
applies_to: 1.0
updated: 2026-11-16
---

# Sound level

The Sound Level sensor in Therbie turns your iPhone or iPad's microphone into a sound meter. It shows how loud it is now, how loud it has been, and which pitches the sound is made of.

**It never records audio.** Each moment of sound is turned into a level and a spectrum, then dropped. Nothing that could be played back is kept or sent anywhere.

## Turn it on

1. Go to the **Measure** tab and tap the **Sound Level** tile.
2. The first time, a sheet explains the sensor and shows its settings. Tap **Turn On**.
3. Allow the microphone when iOS asks.

After that, a tap on the tile turns Sound Level on, and the tile's power button turns it off. When it's on, tap the tile to open the meter full screen.

If you didn't allow the microphone, the Sensors screen says **Not allowed. Change it in Settings › Therbie.**

## The meter

| Panel | What it shows |
|---|---|
| **Level** | The current level on a 20–120 dB gauge in loudness colours, with a white mark for the highest level of the last 3 seconds |
| **Last minute** | The level over the last minute, with the average (an energy average, as sound meters calculate it) and the maximum since the sensor started measuring |
| **Spectrum** | How loud each pitch is, from 50 Hz (deep hum) to 16 kHz (hiss), with the strongest one named |
| **Spectrogram** | The last 10 seconds of the spectrum as a picture: time across, pitch up, brighter for louder. Speech, music and machines each leave their own pattern |

**Loudness bands**, following common hearing guidance:

| Band | Level |
|---|---|
| Quiet | Under 40 dB |
| Moderate | 40 to 70 dB |
| Loud | 70 to 85 dB |
| Harmful if long | 85 to 100 dB |
| Dangerous | Above 100 dB |

Around 85 dB is usually considered safe for about 8 hours a day, and every 3 dB louder halves that time. Therbie is not a hearing-protection device.

## Accuracy

Phone microphones aren't calibrated sound meters, and iOS doesn't tell apps how sensitive yours is. Therbie's levels are estimates, good for comparing places and moments.

If you have a sound meter, adjust **Calibration** under Sound Level in **⋯ › Sensors** until the two agree. It's set in dB at full scale, from 80 to 120 (default 100).

## Identify sounds

**Identify sounds** is off by default. When it's on, Apple's on-device sound classifier names what it hears, for example traffic, rain, birds or voices. The names appear as chips in the meter.

- **Only the names are kept,** in the sound log's `sources` column. No audio is kept.
- **Battery use becomes high.**
- **Where:** turn it on under Sound Level in **⋯ › Sensors**.

## What's logged

While Sound Level is on, Therbie logs the average and peak level every second to History. History shows a Sound Level chart. Insights can mention the loudest moment of the day, and how much of a day's safe noise exposure you had.

## Sound log (frequency bands)

**Log frequency bands** is on by default. While Sound Level runs, Therbie keeps a log of levels as a CSV file per day:

- **What each row holds:** the level and 26 third-octave bands from 50 Hz to 16 kHz.
- **How often:** **One row every** 1 second, 10 seconds (default) or 1 minute.
- **How long:** 30 days on the device.
- **What it isn't:** it's levels only, so speech can't be recovered from it.

Each file starts with lines beginning with `#` that describe the columns: time in UTC, energy average, loudest and quietest level, one column per band in dB, and `sources`. They also say how the levels are calibrated. Spreadsheets and scripts can read the file as it is, for example with pandas: `read_csv(..., comment="#")`.

To share it, open the meter and tap **Sound Log**, then choose **Share the Last 7 Days** or a single day. The sound log also appears on the **Sessions** tab. In Shortcuts, the **Get Sound Log** action returns a day's file.

## In the background

Sound Level runs while Therbie is on screen. It also keeps running when you switch apps or lock the device in two cases:

- **Keep logging in the background** is on (under Sound Level in **⋯ › Sensors**). It's off by default.
- **A trip is recording** while Sound Level is on.

While it runs in the background, the microphone stays on, iOS shows its orange indicator, and battery use is high. Therbie also keeps History's CPU, memory, heat and battery readings going every 10 seconds. To stop it, turn the setting or the sensor off, or stop the trip.

## Where the data goes

Levels, the sound log and identified sound names stay on the device. They are also sent to a Mac you've paired, with History; see [Pair your Mac and devices](https://irrhuh.app/therbie/guide/pairing.html). Nothing else leaves the device, except files you share yourself.
