Therbie Help
iPhone and iPad

The dashboard (Device tab)

The dashboard is the Device tab in Therbie on iPhone and iPad. It is one scrolling page that starts with four rings (CPU, memory, thermal state and battery), then has one card per topic, each with a headline number. On iPhone the cards stack in one column. On iPad, or an iPhone in landscape, they spread into two or three columns.

The line at the top shows the device's chip, its model identifier (for example iPhone18,1) and its iOS or iPadOS version.

The ⋯ menu

The ⋯ (Options) button at the top right of every tab holds Therbie's settings:

ItemWhat it does
Set refresh frequencyEvery 2 s, Every 5 s or Every 10 s. The default is 5 seconds. 2 seconds is the most responsive; 10 seconds uses the least battery. In Low Power Mode, or when the device is Hot or Critical, Therbie waits at least 10 seconds whatever you choose
Animate readingsRings and bars glide to each new reading instead of jumping. On by default on devices with an M-series chip, off by default on devices with an A-series chip. Always off when Reduce Motion is on in iOS Settings
Add to Control Center & WidgetsA short guide to adding the control and the widgets
SensorsEvery sensor's switch and settings. See the sensor pages, such as Motion instruments
AlertsNotifications for heat, memory and battery. See Alerts
Shortcuts & SiriWhat Therbie's Shortcuts actions do, with example automations. See Shortcuts and Siri
Export dataShares Therbie's three data files (history.json, benchmarks.json, data-usage.json) through the share sheet, for example to the Mac app. Appears once the files exist, about a minute after first launch

Animations cost CPU. In the developer's measurements (7 November 2026, at a 2-second refresh), they roughly doubled Therbie's own CPU use on an iPhone 17 Pro and nearly tripled it on two iPads with A-series chips. That's why they're off by default on A-series chips.

The cards

CardHeadlineWhat else it shows
InsightsThe most notable thing TodayTap Show All for every finding today and this week. See History and Insights
CPUTotal load across all coresA chart of the last 90 readings and a bar per core
MemoryMemory in useApp, Wired, Compressed, Cached and Free memory. See Memory, explained
ThermalNormal, Warm, Hot or CriticalWhat the level means for performance. See Thermal states
BatteryLevel and stateLow Power Mode. While charging: the estimated charging speed (for example +0.8% per min · ≈ 12 W) and the time to 80% or to full. See Battery readings
Floating MonitorStart or stopSee Floating monitor
HistoryPeak CPU over the last 24 hoursTime spent Warm or hotter today. Show History opens the charts
BenchmarkYour last resultsRun tests opens the Benchmark screen. See Benchmarks and throttle tests
NetworkDownload and upload speedA chart of the last 90 readings
Data UsageThis billing cycleCellular, Wi-Fi and Hotspot totals. See How data usage is counted
GPUWhat the GPU is, not how busy it isChip, Metal family, Memory budget per app, Unified memory and Hardware ray tracing. iOS doesn't let App Store apps read GPU load; the card's ⓘ says so
StorageSpace usedFree space as iOS reports it for large downloads

On iPhone the cards appear in the order above. On iPad the order changes to fill two or three columns.

The Mac Testing and Your Mac cards are on the Mac tab, not the Device tab. Sensor tiles are on the Measure tab.

The ⓘ explainers

Each card's ⓘ button opens a short explanation: what's counted, what iOS doesn't allow, and what's normal. A full memory bar, for example, is how iOS is meant to work.

Battery and charging

iOS gives many devices' apps the battery level only in 5% steps. Therbie marks those readings with ≈. Battery readings explains why.

  • Charging speed is estimated from how fast the level rises. Therbie shows it as percent per minute and an approximate wattage.
  • Charging is holding at …% appears only on devices that report single percents. It shows when the level has stayed the same for 10 minutes while plugged in, at about 80% or above. That's usually the charge limit or Optimised Battery Charging.
  • Charging slowly appears when the level is below 80% and the estimate is under about 7.5 W. That usually means a low-power charger, a worn cable, or a hot or busy device.

Data usage

Therbie adds up Wi-Fi and cellular traffic by day and groups it into billing cycles. Set the day your cycle starts in the Data Usage card's ⓘ sheet, under Billing cycle starts on. Personal Hotspot traffic also passes through cellular, so the Hotspot figure is part of the cellular total, not extra. Read How data usage is counted before relying on the figures.