GNSS sky plot (predicted)
GNSS Sky in Therbie shows where the navigation satellites (GPS, Galileo, GLONASS and BeiDou) should be in the sky above you. It shows how many are above the horizon and how that changes over the next 12 hours.
Use it to troubleshoot poor GPS: is the sky short of satellites right now, or is something (buildings, trees, a car roof) blocking them?
Predicted, not received
iOS doesn't let apps see which satellites your iPhone or iPad's GPS receiver is tracking, or how strong their signals are. So Therbie calculates where the satellites are from their published orbits.
That means:
- It shows what's overhead, not what your device receives. A satellite on the plot can be blocked by a building and unused by your device.
- It works the same indoors and outdoors, and with GPS off.
- For what your device's GPS is actually doing (accuracy, update rate), see the GPS quality panel in Location and trips.
The screen's title is GNSS Sky (Predicted), and every plot is labelled Predicted from published orbits.
Turn it on
- Go to the Measure tab and tap the GNSS Sky tile.
- The first time, a sheet explains the tool. Tap Turn On.
- Choose Allow While Using App if iOS asks. Therbie needs your rough position to know which part of the sky is yours. If Location is already on, it uses Location's position. Otherwise it asks once for a position accurate to about a kilometre, which is plenty. Update Position gets a fresh one.
- Tap the tile to open the sky plot, then tap Download orbit data.
Your position is used on the device only, to work out your sky. It isn't stored or sent anywhere.
Orbit data and your privacy
The orbits come from CelesTrak, a free public source of satellite orbit data. On iPhone and iPad, CelesTrak is the only internet server Therbie contacts that isn't Apple's. Apple's own services handle the map in Location and city search in Sun & Moon.
- Nothing is downloaded until you tap Download orbit data. Turning GNSS Sky on doesn't download anything by itself.
- What's sent: the request goes to celestrak.org over HTTPS, without cookies, and asks only for the four constellations' orbits. No personal data is sent: not your position, not any identifier. Like any website, CelesTrak sees your IP address.
- How often: at most once every 12 hours. Orbits don't change quickly.
- Where it's kept: on your device only, so the sky plot works offline afterwards. It isn't included in your device backup, because it can be downloaded again.
- When it's stale: data more than 14 days old is marked Stale. Download again for accurate positions.
The sky plot
- Layout: the edge of the circle is the horizon, and the centre is straight up (the zenith). Rings mark 30° and 60° above the horizon.
- Turn with the compass is on by default. The plot turns so the top points the way your device points: lay it flat, screen up, and the plot matches the sky around you. Turn it off to keep north at the top and east on the right, like a map.
- Colours: dots are coloured by constellation: GPS cyan, Galileo yellow, GLONASS red, BeiDou green.
- Labels are the satellite's number: G13 is GPS PRN 13, E11 is Galileo E11, C19 is BeiDou C19. GLONASS labels show the satellite's GLONASS number (for example R716), because the published names don't include its slot.
- Tap a satellite for its details (below). Its path over the next 12 hours is drawn as a dashed line.
- Ring satellites that broadcast L5/E5a is on by default. Satellites that send a second frequency get a white ring. See Dual frequency below.
- Geostationary satellites: BeiDou includes some, which sit still in the sky. From Europe and the Americas most of them are below the horizon.
Satellite details
Tap a satellite on the sky plot or in the AR view to see:
- What it is: its number, name, constellation, generation (for example GPS IIF or Galileo FOC) and the year it was launched.
- Where it is now (predicted): direction, height above the horizon, distance, how long its signal takes to reach you, whether it's approaching or moving away, and its Doppler shift at GPS L1.
- Its pass: when it rises above your elevation mask, its highest point, and when it sets, within the next 12 hours.
- Signals it broadcasts, by generation, and its orbit (height, period, inclination, and the date of the orbit data).
Signal health and strength aren't in the published orbits, and iOS doesn't say whether your device is using a satellite, so neither is shown.
Dual frequency (L5 and E5a)
Each generation of satellite broadcasts a different set of signals. GPS IIF and GPS III satellites broadcast L5, and every Galileo satellite broadcasts E5a, on a second frequency. Older GPS satellites (IIR, IIR-M) don't.
Dual-frequency receivers, such as those Apple lists as "dual-frequency GPS" in recent Pro iPhones' tech specs, use L5 and E5a alongside the usual L1/E1 signal to reject reflections off buildings. So the number of L5/E5a satellites up matters most in cities.
The sky plot rings those satellites and counts them. This shows what each satellite sends, not what your device receives. BeiDou-3's B2a signal is on the same frequency, but Apple lists only BeiDou B1 for iPhone, so BeiDou isn't ringed.
AR sky view
Tap AR Sky View under the sky plot, allow the camera, and point your device at the sky, or at the ceiling: the positions are calculated, so walls and roofs don't matter.
- Markers: satellites appear as small markers in their constellation's colour, labelled with their number. Ringed ones broadcast L5/E5a; faded ones are below the elevation mask.
- Guides: white dots mark the horizon, orange dashes the elevation mask, and N, E, S and W are on the horizon.
- Zoom: pinch, or use the slider (digital zoom, up to 6×). Tap a satellite for its details.
- Direction: directions come from the compass, which is usually right to within 5 to 15° and worse near steel, magnets and electronics. If the markers look turned, move the device in a figure of eight and tap Realign.
- Camera: used only for the live view. Nothing is photographed, recorded or stored. Battery use is high while the AR view is open.
Elevation mask
Satellites low on the horizon are usually blocked by buildings and terrain, and their signals cross more atmosphere, so receivers often ignore them. The Elevation mask sets the angle below which satellites are dimmed and not counted. It runs from 0° to 40° in steps of 5°; the default is 10°. Try 15 to 20° in a city.
Counts and the next 12 hours
- Counts show how many of each constellation are predicted above the mask now.
- Next 12 hours shows the predicted number above the mask every 10 minutes, stacked by constellation. Look for dips if you're planning a survey or a recording in a difficult place.
How accurate is it?
Therbie moves each satellite along its published orbit, including the slow turning of the orbit caused by Earth's equatorial bulge. It leaves out smaller effects (the pull of the Moon and Sun, and short-term wobbles), which full SGP4/SDP4 orbit software includes.
For these satellites, 20,000 to 36,000 km up, that leaves an error of tens of kilometres at most after two weeks. That's about a tenth of a degree as seen from the ground, far smaller than a dot on the plot. Older data drifts further, which is why it's marked stale after 14 days.
Earth's rotation uses the standard sidereal-time formula. The tiny differences between time scales, and the wobble of Earth's axis, add less than a hundredth of a degree.
Battery and what's logged
- Sky plot: battery use is low. While the plot is open, Therbie works out positions every couple of seconds. It uses the compass while Therbie is on screen, and gets your position once.
- AR view: uses the camera and motion tracking, so its battery use is high while it's open.
- Logging: GNSS Sky doesn't log to History.