Battery readings
On many iPhones and iPads, iOS gives apps the battery level only in 5% steps. Therbie marks those readings with ≈, and they can differ from the status bar's percentage by a few points. On a Mac, the battery level is exact.
How Therbie knows
Therbie treats a device's battery readings as approximate until it has seen three different levels that aren't on a 5% step, for example 73%, 81% and 92%. After that, it shows single percents without the ≈.
Why the level can look stuck
iOS can keep handing apps an old battery level while charging. Therbie asks iOS for a fresh reading every 20 seconds. Even so, with 5% steps, a level that doesn't move for ten minutes while charging is normal.
Charging speed and watts
iOS doesn't tell apps the real charging power. Therbie measures how fast the level rises and combines it with a typical battery size for the device model. The watts shown are a rough guide, marked with ≈.
Below 80%, a reading under about 7.5 W makes Therbie show Charging slowly. That usually means a low-power charger (a monitor's USB-C port, for example), a worn cable, or a hot or busy device. For a proper measurement, use the Charger Test on the Benchmark screen; see Benchmarks and throttle tests.
Charge limits and "holding"
- iPhone 15 and later: Settings › Battery › Charging sets a limit from 80% to 100%.
- Other iPhones: Optimised Battery Charging learns your routine and may hold at 80% until you need it.
- iPad: options vary by model.
On devices that report single percents, Therbie shows Charging is holding at …% when the level hasn't moved for 10 minutes while plugged in, at about 80% or above.
What apps can't do
Apps can't:
- read or change the charge limit;
- turn Low Power Mode on or off;
- open the Battery page in Settings.
So Therbie tells you where to find each.
Low Power Mode
The quickest way to turn it on is the Control Center control: open Control Center, tap +, then Add a Control, and choose Low Power Mode. A Shortcuts automation with the Set Low Power Mode action can also turn it on at a battery level you choose.
In Low Power Mode:
- Benchmarks run slower, and Therbie warns you.
- Therbie reads less often, at least every 10 seconds, to save energy.
- The Mac won't start tests on a device that has it on. See Testing devices from your Mac.